Home

 
Contact | Impressum
   
Welcome

Welcome to burger-web.com. On this page you wll find some information about projects for measurement, automation and controlling of CNC-Machines.

 

Comming soon

 

AKKON CNC software

Akkon handwheel

 

AKKON Controller board, based on ARM 7, LPC2148 controller

AKKON CNC controller

   

 

 

News - Update of AKKON CNC Control software in progress
3rd of October 2018 new home page available
8th of November 2017   comming soon - new web site using CMS
30th of July 2017 AKKON Desk, CNC Software - Version 2.0.0.806 available for download
19th of November 2016 AKKON Desk, CNC Software - Version 2.0.0.782 available for download
6th of February 2014
Pictures about AKKON CNC
28th of January 2013 AKKON Desk, CNC Software - Beta version available for download now
23th of November 2012 AKKON Desk, CNC Software - Beta version available for download now
17th of November 2012 AKKON Desk, CNC Software - Beta version available for download now
Comming soon AKKON Motion Controller - small controller board, based on dsPIC30 micro controller
Comming soon AKKON Motion Controller - High speed multi-axis motion controller stepper motors
6th of December 2011 AKKON Desk, CNC Software - with Look-ahead-buffering
8th of July 2011 AKKON Desk, CNC Software - with Look-ahead-buffering
13th of January 2011 AKKON Controller Board -19-inch version with ISEL compatiblity
30th August 2010 AKKON IO Control - Measurement and controling over USB using AKKON controller board (PIC18F4550)
8th of July 2009 AKKON Desk, CNC Software - German version and partly support of w-axis
16th of November 2009 AKKON Frässpindel - first prototype
15th of October 2009 AKKON Frässpindel - comming soon
5th of September 2009 AKKON handwheel ready for use
18th of August 2009 AKKON Desk, CNC Software - German version and partly support of w-axis
9th of July 2009 AKKON Desk, CNC Software integration of AKKON Handwheel as well as program improvements
19th of June 2009 Prototype of AKKON handwheel final version available at the end of August
10th of May 2009 AKKON Desk, CNC Software added import for excellon and hpgl-files.
10th of May 2009 Isolation milling with Akkon (under construction, only available in German language)
13th of April 2009 Improved version of Excellon to G-Code converter
13th of March 2009 AKKON Desk, CNC Software now with USB support for higher performance
comming soon AKKON Handwheel (under construction)
3rd of February 2008 Improved version of Excellon to G-Code converter
2nd of February 2009
New version of AKKON Desk, improved version
1st of January 2009
New version of AKKON Desk, Now with 3D-Viewer, automatic tool measurement and a wide range of other features
23th of May 2008 AKKON Controler Board with ARM7, LPC2148 is ready for use. This board will also supported by the AKKON CNC control software
23th of May 2008
New version of AKKON Desk, CNC-Control (micro stepping mode, improvements regarding stepping frequency, configuration and user interface, turret, see release notes)
14th of March 2008 COMMING SOON: AKKON Controler Board with ARM7, LPC2148 is ready for construction. This board will also supported by the AKKON CNC Control software
14th of March 2008
COMMING SOON: New version of AKKON CNC Control will be released at the beginning of April (improvements regarding stepping frequency, configuration and user interface, see release notes)
28th of October 2007 Improved version of Excellon to G-Code converter
20th of October 2007
AKKON CNC Control, Version 1.1, CNC software for the AKKON USB vontroller board (Improvements of manual and automatic mode as well as user interface - see release notes)
30th of September 2007
AKKON CNC Control, Version 1.1, CNC software for the AKKON USB vontroller board (Improvements of manual and automatic mode as well as user interface - see release notes)
11th of August 2007
AKKON CNC Control, Version 1.1, CNC software for the AKKON USB vontroller board (some small improvements)
4th of November 2006 Improved version of Excellon to G-Code convertor
4th of November 2006 IO-Interface with 7-segment display using MAX7219, 4 switches and 2 LEDs for rapid ralization of devices.
as extension to the PIC18 Development Board
21th of August 2006 1.4 Ampere PIC Microstep Motor Controller with IMT901 (under construction)
17th of August 2006 PIC18 Development Board with RS232, RS485, I2C, ICSP using alternative mouning (under construction)
1st of July 2006 CNC phase controller with PIC18F252 (currently under construction) Free version with schematics, documentation and source code (partly available in german language) (under construction)
8th of March 2006
AKKON CNC Control, CNC software for the AKKON USB vontroller board (some small improvements)
2nd of March 2006 (up4) Updated version of free CNC-Viewer, Version 1.3 is available. Some small improvements
24th of Januar 2005 AKKON USB Controller Board - Development board with the PIC18F4550 micro conttroller woth USB.
Essential extension of documentation, adding some programming examples
23th of January 2006
AKKON CNC Control, CNC software for the AKKON USB vontroller board now with installation procedures
6th of January 2006 Updated version of free CNC-Viewer, Version 1.3 is available. Now with improved zoom functionality

 

6. November 2005
AKKON USB Controller board, PIC Development Board with Example CNC-Control (Beta Version)
19th of June 2005 4 Ampere stepper motor card forself construction. The card is supported by common CNC software. A demo version of a CNC software is also available for download.
24th of April 2005   Current watchdog for DC-nets with digital output
11th of march 2005 Easy example: frequency measuerement with PIC16F84
11th of march 2005 Data logger for micro controller applications
10th of March 2005 Rabbit Application Framework. Improve development process and save time with by implementing micro controller applications. C-Code for Dynamic C, Keil or MP-Lab
 

Impressum | Limited Warranty

Version 1.0, ©Gerhard Burger 2004-2016, all rights reserved, last update 25.10.2016